Top led flood light provider: DALI Dimming – It is a communication interface called a digital addressable lighting interface (DALI). It allows brightness control, color temperature control, recall preprogrammed settings, group control, and error diagnosis capabilities. It transmits data using the existing power lines to control a set of lights. Pulse-Width Modulation (PWM) – It is a method of turning the LED on and off faster than the frequency cycle. The rapid cycling decreases brightness and pulse width. It is a more common technique in small street LEDs. NAMA Connector – Photocells can connect to the light using a NAMA connector with 3-pin, 5-pin, and 7-pin configurations. A photocell connection with the 3-pin NAMA connector will turn the light ON/OFF based on ambient light. A 7-pin connector provides the flexibility of brightness control with lighting conditions. Discover extra information at street light manufacturer.
Top LED Roadway Lighting Technologies to Consider – After comparison of different types of lamps used in roadway lighting, we can safely state that LED is the way to the future. Therefore, LED lamps are best for roadway lighting. To fully understand LED technology, we must consider intricate details about LED roadway lighting before purchasing one. Roadway lighting is exposed to harsh conditions, including high wind, UV radiation, thunderstorms, high humidity, salt spray, vandalism, dust, and lightning strikes. LED roadway light manufacturers use various design features to counter these conditions. Let’s analyze what technologies make LED roadway lights tough and durable!
The most frequently used metal halide is sodium iodide. As the electric arc increases gas temperature, sodium dissociates from the iodine, adding orange as the metal ionizes. Metal halide lights offer higher efficacy than their counterparts. They produce up to 75-100 lumens per watt of electricity consumed. They primarily use lighting applications like sports arenas, automotive headlamps, and public places. They take time to reach full operating conditions as the pressure and temperature inside the gaseous mixture tube take time to warm up. This period can be as long as five minutes. As the metal halide lamp ages, the outer glass tube becomes weakened due to operational heat stresses. The pressure inside the tube can reach up to 3.5 atm. The tube at the end of life usually breaks inside the outer glass casing. Generally, their life span is < 20,000 lumens.
LED tube energy saving is more than 70%, life is more than 10 times that of ordinary lamp (in theory, it can reach more than 50,000 hours), almost maintenance-free, there is no need to change lamp, ballast, starter frequently The problem can be exchanged for the cost saved in about half a year. The green and environmentally-friendly semiconductor electric light source has soft light and pure color, which is beneficial to people's vision protection and health. Applicable occasions: Hotels, shopping malls, schools, hospitals, factories and underground parking lots are widely used to replace traditional T5 fluorescent lamps.
Our LED light fixture can be divided into indoor LED lighting and outdoor LED lighting according to the place where LED lamps are used. Indoor lighting requires high brightness, good color consistency, high color rendering, and high versatility. Outdoor lighting requires high brightness, long life, and good resistance to harsh environments. Our LED lamps feature high luminous efficiency, low energy consumption, long life, safety, and environmental protection. They can operate for more than 50,000 hours without failure, widely used in factories, warehouses, shopping malls, roads and other public places that require long-term lighting.
Because the LED garden lamp has the characteristics of versatility, aesthetics, landscaping and decorating the outdoor environment, it is also called landscape LED garden lights. It has the characteristics of energy-saving and high efficiency. It is mainly used for lighting up the urban slow lanes, narrow lanes, residential quarters, tourist attractions, public places such as parks and plazas, which can extend the time people spend in outdoor activities and improve the safety of properties. Applicable occasions: Widely used in urban roads, parking lots, bicycle lanes, gardens, plazas, residential areas and other outdoor venues.
The solar road lighting is powered by a crystalline silicon solar cell. The maintenance-free valve-regulated sealed battery (colloidal battery) Sealed Lead Acid is exceptional in storing energy. The super bright LED lamp is used as a light source and is controlled by an intelligent charge and discharge controller, replacing the traditional utility electric lighting. Outdoor solar street lamp is to convert sunlight collected during the day into electric energy for storage, and then use the stored electric energy as LED lighting at night. Find more details at https://www.chz-lighting.com/.
If you are struggling to differentiate street lights from other light sources, take a look at some of the features used to identify them. You need to understand that street lights are commonly made of metals such as aluminum that are corrosion resistant. Alternatively, some of these street lights are made from a strong plastic material such as polyethene. The solar street light manufacturers have been factoring in the issue of withstanding outdoor elements when looking for materials to craft these lights. Most of them are pole- mounted on either existing utility poles or dedicated poles.
In recent years, we have heard more, and more people talk about smart street lights, but in many cases it is not very clear what a smart street light is. Compared with common street lamps, what special functions do smart street lamps have? Smart street lights refer to street lights that realize remote centralized control and management of street lights through the application of advanced, efficient and reliable power line carrier communication technology and wireless GPRS/CDMA communication technology. Smart street lights have automatic brightness adjustment and remote lighting control according to traffic flow, Active fault alarm, lamp cable anti-theft, remote meter reading and other functions can greatly save power resources, improve the level of public lighting management and city management, and save maintenance costs.
The fitness room uses 70 150W professional anti-glare LED lamps, which are directly replaced according to the original lighting method. The average illumination of the venue is above 300lx, and the uniformity is above 0.6, which exceeds the actual needs of customers. Compared with the original lighting scheme, the lighting quality of all venues has been comprehensively improved, the lighting is evenly distributed, there is no dark area, the vision is clear and bright, the performance of the lamps is stable, and the energy efficiency is higher, which not only ensures good lighting effects, but also meets the goals of energy saving and consumption reduction. . The new lighting environment will bring the school teachers and students a more invigorating sports enjoyment.