Quality ignition coils manufacturer and supplier: These multiple-coil-pack-systems are much more reliable than the distributors of the past, but individual ignition coils can still fail over time and lead to an engine misfire condition. When a cylinder misfires, that means the fuel inside it is not burning at the correct time or not burning at all. This is also sometimes referred to as a dead cylinder. Prolonged misfiring can lead to larger problems like warped piston rods or corrosion inside the cylinder wall. It can also cause unburned fuel to leak into your exhaust system, which is bad for the environment and worse for your car’s catalytic converters. Once identified, a misfire should be addressed as soon as possible. Discover more info on https://www.hj-auto.com/ignition-coil.
The automotive ignition coil consists of an electrically-conductive wire wound into a helix, usually around a magnetic core. When power is applied across the two coils, it produces an electrical field that generates an electromagnetic field that induces currents in the secondary winding of the coil. This high voltage is then stepped down by one or more stages before being applied to the spark plug. There are three different types of car ignition coils: Single-coil systems use one coil per cylinder. Dual-coil systems use one coil per cylinder, but they are wired in series so that each fires twice for every cycle of the power supply. In this way, it’s possible for both coils to fire at once, improving efficiency and reducing wear on the engine by giving it more time between firings.
Principle of the ignition coil: It is composed of the main coil, a secondary coil, a magnetic core, a switching transistor and other auxiliary components. The main coil is charged by a battery, and the secondary coil is discharged by a spark plug to ignite, and the triode is responsible for switching. The charging time is controlled by the battery voltage and the engine speed to ensure that the energy is consistent each time. The ignition coil has two types: 3-wire and 4-wire. The 3-wire is the power supply positive, negative, switch control (ECU command), and the 4-wire has one more ignition detection. Wire can detect whether the spark plug is ignited (whether there is discharge current in the secondary coil). Ignition coil manufacturer has more than 30 years of production experience.
In the same way that increasing the speed of movement of a magnetic field across a coil of wire will increase the voltage induced into the coil, if a collapsing magnetic field can be made to collapse more rapidly, this will induce a higher voltage. Additionally, a higher voltage can also be induced into the coil if the number of windings in the coil is increased. Mutual inductance and transformer action: If two coils of wire are placed next to or around each other and an electric current is used to create a magnetic field around one coil (which we call the primary winding), the magnetic field will also surround the second coil (or secondary winding). When the electric current is switched off and the magnetic field then collapses, it will induce a voltage into both the primary and the secondary windings.
Using a changing magnetic field to induce an electric current: If a coil of wire is exposed to a magnetic field and the magnetic field then changes (or moves), it creates an electric current in the coil of wire. This process is known as ‘inductance’. This can be demonstrated simply by moving a permanent magnet across a coil. The movement or change in the magnetic field or magnetic flux induces an electric current into the coil wire. There are two main factors that affect how much voltage is induced into the coil: The faster the change (or speed of movement) of the magnetic field and the greater the change in the strength of the magnetic field, the greater the induced voltage. The greater the number of windings in the coil, the greater the induced voltage.
Haiyan ignition coil suppliers produce a number of different product series, including car coil, tool cabinets and hardware accessories. The products of Haiyan ignition coil wholesale suppliers have the following advantages: well-chosen materials, reasonable design, stable performance, excellent quality, and affordable price. Such a product is up to customers’ needs for a highly cost-effective product. Haiyan is a ignition coil suppliers and car coil company which have created a number of successful series, and car coil are one of them. Read more info at https://www.hj-auto.com/.
Haiyan is a professional ignition coil manufacturer & supplier, specialising in car ignition coil, plug coil and spark coil. Haiyan ignition coil manufacturer products contain high-quality car ignition coil, engine coil, ignition coil packs, tool cabinets, hardware accessories, and precision matching pieces of Japanese host. Every year the production quantity of ignition coils reach 1,000,000 PCS, cars spare parts reach 2,000,000 sets and 3,000,000 sets of Japanese hosts accessories.