Custom alloy wheels wholesale manufacturer in China? Misunderstanding : do not use the center ring (diameter ring) hub is a good hub. The center ring is called Hub-ring. there are mainly ABS and aluminum alloy. Here is a popular science about the origin and role of the center ring (reducer ring) : Why use the central sheath ring (reducer ring)? Due to the same hole distance (PCD) of different models of the center hole data is not the same, in order to save inventory, the majority of modified hub manufacturers will make the hub center hole data larger, to meet the needs of different models. When the hub center hole is larger than the shaft head, there will be a gap between the shaft head and the hub center hole. At this time, it is necessary to fill the gap between the center ring, to help the hub and the vehicle axle head closely. Read even more information at custom alloy wheels.
The two piece wheel consists of two parts: the rim (Barrel), and the wheel width. It is possible to combine different rim widths and thicknesses on one hub, or to combine widths and offsets for more options. And the two spokes are interchangeable, so that when repairing and replacing, it is not necessary to replace the whole hub, but only the part, which is finally fastened with high-strength bolts. This is the most primitive processing method for aluminum alloy wheels, which can be formed by pouring high-temperature liquid metal into the mold and cooling it. This method is efficient and low cost, but the uniformity of each part of the manufactured wheel is poor, and the molecular density is relatively low, resulting in low strength, so it is not very suitable for high-strength use of passenger vehicles.
Cast aluminum wheels ultimately need to be processed by CNC machine tools, so no matter the roundness, end direction and radial accuracy of the wheels, they are not comparable to traditional rolled steel rings. The dimensional accuracy of the wheels directly affects the driving performance of the vehicle. Especially for high-speed vehicles, it is more prominent, such as the grip, yaw and stability of the whole vehicle during driving, and braking in case of an accident. The high speed and smooth driving of the car.
Pure electric vehicles are driven by electric motors. Unlike fuel vehicles, the engine combustion is not only loud, but also vibrates greatly. When pure electric vehicles are driving, there is no obvious shaking, and the front of the car does not need an air intake grille. Very quiet in the car. Of course, to drive a pure electric car, you need to master the switch. Many people are prone to motion sickness. Many people are used to driving a fuel car. When you start off with a kick of the switch, the power comes fast, the linearity is very strong, the speed is fast, and the back feeling is full. When braking, the switch is closed, and the power recovery function is added, and the power is lost instantly, and the head-up and nodding movements are more obvious.
The characteristics of high thermal conductivity of aluminum alloy wheels are extremely beneficial to the heat dissipation effect of the car tires due to high-speed driving, so that they are better than steel under the same conditions. It reduces the possibility of hot tires during long-distance high-speed driving, and significantly improves the safety performance of high-speed driving. It is easier to realize the “tubeless” of modern wheels. For a tubeless wheel, the original rubber inner tube is directly replaced by an aluminum rim. If a “puncture object” such as a nail is inserted into the outer wheel while driving, as long as it is not pulled out, it will not be removed. There will be an accident that the car rolls over due to a sudden flat tire like a tire with a tube. After a tubeless wheel encounters a “puncture object”, it can generally last for at least an hour or even longer, which is particularly important for the safety of cars driving on the highway.
We not only have the traditional low-pressure casting technology, but also have the high strength and light weight manufacturing technology of “low-pressure casting + spinning”. We always maintain various advanced technology advantages in aluminum alloy wheel manufacturing to meet customers’ needs and lead the industry development. The formula has perfect testing equipment, including material testing machine, hardness tester, solid aluminum alloy containing slag quantitative tester, X-ray diffractometer, bending fatigue tester, radial fatigue tester, biaxial fatigue tester, 13° impact tester, 30°/90° impact tester, salt spray test chamber, humidity and heat test chamber, etc., which can carry out the four major testing areas of wheels (dimensional testing, alloy material performance, reliability and safety, coating. Find even more info at jjjwheel.com.