Painters in Jacksonville and home paint advices: Pros usually follow a certain order when painting a room. They paint the trim first, then the ceiling, then the walls. That’s because it’s easier (and faster) to tape off the trim than to tape off the walls. And you certainly don’t want to tape them both off!
Determine how much paint you’ll need: Whether you’re painting a powder room or the exterior of your house, the general rule of thumb is one gallon per 400 square feet, says Carl Minchew, vice president of color innovation and design at Benjamin Moore. But that’s just a rough guideline: To get a more precise number, which you’ll definitely want for large projects, use a paint calculator like the ones provided by Benjamin Moore or Pratt & Lambert; they take into account window and door measurements. (And both assume two coats of paint per project.)
After painting the ceiling, work from the top down: Start with the crown molding, then do the walls and then paint the casement molding around the windows and doors. Do baseboard molding last. “Painting the baseboards last keeps dust and grit from traveling off the floor, onto the brush and then up onto the freshly painted casements,” explains Weeks. Between coats you’ll want to back-prep, or sand off any bumps, before applying the next coat. Use a light to check the surface for drips, roller flecks, or other imperfections. The best time to tackle windows is in the beginning of the day, when you’re fresh,” says Doherty. “But it still takes me an hour to do a standard window.” For double-hungs, begin by raising the inner sash and lowering the outer sash until their positions are almost reversed. Paint the lower half of the outer sash first, then the entire inner sash. Once the lower sash is dry, return both to their normal position, but leave them slightly open. Finish painting the outer sash. “Windows take too long to tape,” says Doherty. When painting, overlap the glass by 1/16 inch to seal the wood. Read more details at Find painters in Jacksonville.
The problem with painting along the edge of textured ceilings is that it’s almost impossible to get a straight line along the top of the wall without getting paint on the ceiling bumps. Pros have a simple solution. They run a screwdriver along the perimeter of the ceiling to scrape off the texture. “This lets you cut in without getting paint on the ceiling texture,” one of our pros says. “The screwdriver creates a tiny ridge in the ceiling, so the tips of your paint bristles naturally go into it. And you’ll never even notice the missing texture.”
The house painters can not pay to be listed. And we do not choose the best painters by the size of the company. We asses the client reviews, work history, bad reviews, customer satisfaction, industry trust and general cost. Find more info at https://www.painters-jacksonville.com/.